Tag Archives: Holset turbo upgrades

Holset HX40 For Sale

Holset HX40 Turbo Upgrade

Holset HX40 T67 67mm x 84mm x 90mm Billet Compressor Wheel Upgrade

We Offer Completely Custom Holset HX40 Turbos For Sale. 

On The Left is an HX40 with a T67 Compressor Wheel, H1E 67 x 76mm Turbine Shaft in a T4 .81 Turbonetics Turbine Housing.

Holset HX35 Turbo Upgrade

 

 

 

 

 

 

 

Holset Cummins H1E H1C HY35 HX35 HX40 HE341 HE351 Turbo Upgrade Options:

Compressor Wheels:

HX40 60 x 86 x 90 7 Blade (Direct Fit For HE351 & HX40 7 Blade) (78lb/min)

HX40 60 x 86 x 90 7 Blade 6mm Tip Height

HX40 63 x 99 x 103 6 Blade

HX40 67 x 84 x 89 7 Blade

HX40 T67 67 x 84 x 89 11 Blade (Shown Above)

HX40 67 x 89 x 95 7 Blade (Most Popular)

 

Turbine Shaft Options:

60mm x 70mm HX35 H1C Turbine

64mm x 76mm HX40 12 Blade Turbine

64mm x 76mm HX40 Super 10 Blade Turbine

67mm x 76mm HX40 12 Blade Turbine

67mm x 76mm HX40 10 Blade Turbine

 Turbine Housing Options:

HY35 HE351 HE341 9cm (Machinable to Variable Turbine Shafts)

HX35 12cm (Machinable to Variable Turbine Shafts)

HX35 14cm (Machinable to Variable Turbine Shafts)

H1C 16cm (Machinable to Variable Turbine Shafts)

H1C 18cm (Machinable to Variable Turbine Shafts)

HX40 19cm T4 Twin Scroll (Machinable to Variable Turbine Shafts)

H1E 22cm T4 Twin Scroll (Machinable to Variable Turbine Shafts)

Garrett, Precision, Turbonetics Turbine Housings (Machining Required):

T3 .63 Vband, 4 Bolt, or 5 Bolt

T3 .82 Vband or 4 Bolt

T4 .81 Open  Vband

T4 .96 Open Vband

T4 Divided .84

T4 Divided 1.15

Please Contact Us To Place an Order For Your Custom Turbo Build

 

Holset HX40 Turbo Upgrade 2

Holset HX40 67 x 89 x 95 7 blade Billet Compressor Wheel Upgrade

HE351 10 Blade 67mm 2

HE351 9cm with 67mm x 76mm 10 Blade Turbine Shaft Upgrade

 

Holset H1C H1E Turbo Compressor Upgrade

For The Holset H1E and H1C, There are a Lot of Upgrades, But It is Important To Understand That The Most Important Upgrade is Our Rebuild Kit Which Prevents Common Thrust Bearing Issues. You Can Find More Information About Our Rebuild Kits Here.

Next You Must Understand That The Compressor Plate for the H1C H1E Turbos Can Be Machined to Use the HX35 HX40 Thrust Collar, Which Allows You to Run the HX35 HX40 Compressor Wheel Upgrades Below:

Here are a List of the Compressor and Turbine Upgrades:

Billet Compressor Wheels

Turbine Shaft Upgrades

NOTE: Machining Is Required for all of the Compressor Wheel Upgrades for the H1C, but for the H1E 60 x 83 Compressor Housing, The 60 x 86 4015c Billet Wheel Is a Direct Drop In After the Compressor Plate is Machined for the HX35 HX40 Thrust Collar, and the Collar Must Be Use in the Build. This Makes for a Super Easy and Cost Effective Upgrade!

These Upgrade Also Work for the HX35 HX40 HE341and HE351!

If You would Like Machining, Rebuild, or Upgrade Services Then Contact Us Here.

If You Are Looking for the Parts Mentioned Above To Build Your Turbo Then Visit Our Ebay Store Here:

ebay store

Holset HX40 67mm x 89mm Turbo Upgrade

HX40 Turbo UpgradeHere is a Holset HX40 67mm x 89mm Turbo Upgrade That We Offer.

Specs:

  • 67mm x 89mm x 95mm Billet Compressor Wheel
  • 67mm x 76mm 10 Blade Turbine Shaft
  • Good for 900 + Hp
  • Machined Bearing Housing for Compressor Oring
  • Upgrade for HX35 HX40 HE341 HE351

Holset Turbo Upgrade For:

  • HX40 Turbo Upgrade
  • HX35 Turbo Upgrade
  • HE351 Turbo Upgrade
  • HE341 Turbo Upgrade
  • HE351CW Turbo Upgrade
67mm hx40 10 blade

HX40 67mm x 76mm 10 Blade Turbine.

HX40 67mm x 76mm 10 Blade Turbine Shaft Upgrade.

  • Lighter Weight than the 12 Blade HX40 Turbine
  • Seems To Lose Some Spool Time Over the 12 Blade
  • The 12 Blade 67mm + 67mm Compressor Wheel in HE351 Spools Faster than the Factory turbo due to the Larger Exducer of the Turbine Shaft

We Do The Service for This Turbo But We Also Sell The Parts Here:

NOTES:   This Upgrade Also works for H1E H1C, But the Compressor Plate must be Machined for the HX40 Thrust Collar (easy job). For the Holset HE351VE VGT Turbo, This Upgrade is Possible, But The Turbine Upgrade is limited to a 64 x 70mm Turbine. The Exducer of the VGT Shaft Upgrade is Limited to 70mm Because the VGT Arms Hit the Turbine Shaft of the 76mm exducer.

If You Need or Want Machining Services, We Machine Housings for $150 Each, Contact us at turbolabamerica@gmail.com for more Information.