Category Archives: Garrett GT28r – GT30r Ball bearing Turbo Rebuild kit

How to disassemble GT3582R

Here is a great step by step tutorial or how to disassemble a garret ball bearing GT35r, the process is the same for a GT25r GT28r GT30r and GT35r. Here are the rebuild kit parts available to rebuild these turbos: Gt25r GT28r GT30r, GT35r Here are some other good videos that you should watch to understand how to rebuild garret ball bearing turbo chargers. Garrett GT3071r turbo rebuild instructions.

Garrett GT25R GT28R GT2871R GT3071R GT3076R Ball Bearing Turbo Rebuild Kit

Here is our rebuild kit that we use to rebuild the following turbo chargers: Garrett GT2554R GT2860R GT2871R GT3071R GT3076R Ball Bearing Turbo Rebuild Kit. This rebuild kit also fits some blouch turbos such as the dominator ball bearing series and the 20g XT-R. It does not fit the 20g XT, the 20g XT-R is a garrett ball bearing version, which is completely different, and the 20g XT cannot be converted to the ball bearing version.

Here you will find a good instructional video on how to rebuild the gt25r – gt30r turbo chargers listed above, and here is a disassembly video of a gt35r which uses the same parts the bearing housing is just machined for the larger compressor wheel to fit, and there are a few variations of the plate to compressor housing, as well as the orings used, if the garrett turbo used an oring at all.

GT2554r GT2860r GT2871r GT3071r GT3071r seal kit

The bearing cage is the same for gt25r – gt30r – gt35r but the turbine wheel / shaft sizes are different. Below we have the gt3071r / gt3076r turbine 55 x 60mm with rebuild kit. Here you can find our gt2871r turbine, gt2860r turbine, gt35r turbine. The gt2871r and gt2860r turbine have different shaft lengths but they uses the same turbine wheel, makes sure you order the correct turbine by measuring the shaft as shown in the pictures. The Gt3071r and GT3076r 10 blade gen1 turbines are the same, and are listed by themselves here.

GT3071r GT3076r ball bearing rebuild kit + turbine shaft

FP 76HTA Turbo Rebuild (Ball Bearing)

FP 76hta Turbo Rebuild (Ball Bearing Turbo)