Tag Archives: Gt3782vas

6.0 Powerstroke Turbo Not Working

Leave a reply

6.0 Powerstroke Turbo Not Working

If Your Powerstroke Turbo Is Not Working, Let Me Help You Diagnose the Problem. Is Your Turbo Blowing Oil Past the Seals Causing the Engine Exhaust to Burn Oil Out the Tailpipe, If so You will see White Smoke With a Blue Tint. The Exhaust Will Smell like Burning OIl and Not like Diesel Fuel.  Your Blue White Smoke Condition Can Go Away When The Engine Warms Up.  If Your Turbo Is Leaking Oil, then it Needs a Rebuild and Needs to Be Replaced.

2005 6.0 Powerstroke turbo problems

 

6.0 Powerstoke turbo not working

If The Turbo Takes a long time to Build Boost, But Makes Great Power in Higher RPM, then the VGT System Needs to Be Cleaned. It is Necessary To Blast the turbine housing, Bearing Housing, and VGT Parts To Fix This Problem. The Reason Why the VGT System Sticks, is because The Bearing Housing Rusts and Makes the Unison Ring Stick To The Bearing Housing Which Will Not Allow the Turbo to Build Boost Effiecently. The Vanes can be Stuck In Open Position for High RPM or Closed Postion for Low RPM. If Stuck In Open Position the Turbo will Take a Long Time To Spool Up, But the Turbo will Perform Great At Higher RPM. If the VGT Is Stuck In Closed Position, then the Turbo Will Spool Up Fast But it will Run Out of Power at Higher RPM.  If You Have This Problem, then the VGT System Needs a Good Cleaning, I recommend Sand Blasting in a Professional Media Blasting Cabinent with a Vacuum Filtration System, Then Painting to Prevent Rust.

You Have 2 Options, You Can Rebuild Your Turbo Or Buy a New 6.0 Powerstroke Turbo. Here “6.0 Powerstroke Turbo Rebuild” You can Learn How to Rebuild The Powerstroke 6.0 Turbo. And Here You can Buy a New 6.0 Powerstroke Turbo Replacement.

6.0 Powerstroke Turbo Replacement

2 Replies

Here is a new 6.0 Powerstroke Turbo Replacement

Turbo – NEW Stock Replacement – 6.0L Powerstroke 2005.5-2007 – Garrett GT3782VA

  • Brand New 6.0 Powerstroke Turbo Replacement $900
  • Not Remanufacured
  • Fixes Burning Oil Problem (blue white smoke out the exhaust)
  • Fixes Turbo Spool Problem (VGT vanes and unison ring stick open and caused by rust in turbine housing) (VGT vanes stuck high rpm mode)
  • Fixes No High Engine RPM Power (Vanes Stuck in Closed Position)
  • Get It Quickly Down Time To Waste on Turbo Rebuild, Buy New!

Click Below to Buy 2003 6.0 Powerstroke Turbo Replacement:

 

 

Click Below to Buy 2004- 2005.5 Powerstroke 6.0 Turbo:

 


 

Click Below to Buy 2005.5  – 2007 Powerstroke 6.0 Turbo:

 

 

Click Below To Buy Powermax Turbo Upgrade:

 

 

Notes: Turbo Differences:

  • 2003 6.0 Powerstroke Specs: 59 X 82 Compressor 66.6 X 72.10 10 Blade Turbine (Has Taller turbine wheel tip height, makes machining required to install turbine in other model turbine housing, vanes are taller and not compatible with other year turbine housings) (2004.5+ has an additional mount on the turbine housing to mount to the pedestal, the 2003 Turbo Doesn’t have This Mount Cast Into The Turbine Housing)
  • 2004 – 2005.5 59×82 Compressor 66.6 X 72 Turbine 13 Blade
  • 2005.5 – 2007 56 x82 Compressor 64.5 X 72 Turbine 13 Blade
  • 2004.5-2007 Powermax Turbo Upgrade 63.5 X 88 GT4088 Compressor Wheel and 2003 66.6 X 72.10 10 Blade Turbine Wheel 175 hp gain without loss of spool.

6.0 Powerstoke Turbo Rebuild 2003 – 2007

If You would rather spend time rebuilding you turbo and less money you can watch my 6.0 Powerstroke turbo rebuild tutorial video and buy our rebuild kit.

We Also Sell Powerstroke Turbo Upgrade Parts that do Require Machining, We Do Upgrade Powerstroke Turbos But it is a Time Consuming Process Which I Dont Recommend Unless you can Afford 3-4 Weeks Down time.

 

 

Here Is A Link To Our Upgraded Complete Turbo , Get your Today !!!!

63.5 X 88 X 94mm Billet wheel !!!!

Supports up to 175hp over stock !!!!