Tag Archives: hahn turbo rebuild kit

DSM 14b 16g Turbo Rebuild Kit

DSM 16g turbo rebuild kitWe sell DSM 14b 16g Turbo Rebuild Kits.

Note: If You are Rebuild a 14b, Leave Us a Message in When You Check Out with Us on Ebay, so We can Include the 14b Thrust Collar.

This Turbo Rebuild kit fits:

  • 16g 18g 20g
  • FP 68 HTA, FP 71 HTA, FP 73 HTA, FP Green, FP Red, FP Black,
  • Evo X Turbo, MAP Evo X Turbo, FP Evo X Turbo
  • Evo 1 – 3 16g, Small 16g, Big 16g, Evo 3 16g
  • DSM 14b (tell us You need the Thrust Collar)
  • Hahn Racecraft 16g and 20g TurboChargers
  • Do Not Use on Evo 4, Evo 5, Evo 6, Evo 7, Evo 8, Evo 9, Turbochargers, Thrust Bearings are Directional

This is the Highest Quality Rebuild Kit available for the MHI Turbos. You can Purchase This Kit Here:

DSM 16g turbo Rebuild Kit

MHI 14B 16g 20g Turbo Rebuild Kit

FP MAP Tomica Racing turbo rebuild kitMHI 14B 16g 20g Turbo Rebuild Kit Fits:

  • Evo X Turbos
  • MHI Genuine 14b,16g, 18g, 20g, FP Green, Red, Black MAP, Tomica Racing, Blouch, Turbos
  • NOT for Evo 4-9 Turbos, (Visit Here for Evo 4-9 Turbo Rebuild kit)
  • Subaru MHI 16g and Upgraded Turbos
  • Hahn Racecraft Turbos
  • Tomei Turbo

This is an Upgraded Rebuild Kit that is Needed for Running Higher Boost Levels. We Have Customers running 34 PSI on This Rebuild Kit  with the Largest Frame Turbo and Making Over 600 HP and Holding Strong!! Here Is Our Amazon Listing If You Need to Purchase:

Here are the Details of what Our Rebuild Kit Includes:

  • 1 upgraded thrust bearing
  • 1 18mm thrust collar
  • 1 18mm thrust spacer (factory is 14mm)
  • 2 journal bearings
  • 1 front seal
  • 1 rear seal
  • oring for compressor housing
  • oring for inside the turbo
  • 2 bearing retaining clips
  • 1 stainless steel rear heat shield
  • 1 c-clip to hold in the front plate.
  • 1 oil return gasket
  • 1 bolt and nut for the vband clamp
  • 1 compressor nut
  • 1 oil deflector

NOTE: **************THIS KIT DOES NOT WORK WITH KNOCKOFF TURBOS SUCH AS CX RACING OR GODSPEED!!!!!************ ONLY THE TRUE MHI TURBOS!!!!!

NOTE: This Rebuild Kit is for Standard Rotation Only (Evo 1 -3 Evo X Turbos). This Kit is not for Evo4 – 9 Turbos Because They Use a Reverse Rotation Thrust Bearing. We also Sell the Evo 4-9 Rebuild Kit Here!