Tag Archives: 4g63 turbo rebuild kit

MHI 14B 16g 20g Turbo Rebuild Kit

FP MAP Tomica Racing turbo rebuild kitMHI 14B 16g 20g Turbo Rebuild Kit Fits:

  • Evo X Turbos
  • MHI Genuine 14b,16g, 18g, 20g, FP Green, Red, Black MAP, Tomica Racing, Blouch, Turbos
  • NOT for Evo 4-9 Turbos, (Visit Here for Evo 4-9 Turbo Rebuild kit)
  • Subaru MHI 16g and Upgraded Turbos
  • Hahn Racecraft Turbos
  • Tomei Turbo

This is an Upgraded Rebuild Kit that is Needed for Running Higher Boost Levels. We Have Customers running 34 PSI on This Rebuild Kit  with the Largest Frame Turbo and Making Over 600 HP and Holding Strong!! Here Is Our Amazon Listing If You Need to Purchase:

Here are the Details of what Our Rebuild Kit Includes:

  • 1 upgraded thrust bearing
  • 1 18mm thrust collar
  • 1 18mm thrust spacer (factory is 14mm)
  • 2 journal bearings
  • 1 front seal
  • 1 rear seal
  • oring for compressor housing
  • oring for inside the turbo
  • 2 bearing retaining clips
  • 1 stainless steel rear heat shield
  • 1 c-clip to hold in the front plate.
  • 1 oil return gasket
  • 1 bolt and nut for the vband clamp
  • 1 compressor nut
  • 1 oil deflector

NOTE: **************THIS KIT DOES NOT WORK WITH KNOCKOFF TURBOS SUCH AS CX RACING OR GODSPEED!!!!!************ ONLY THE TRUE MHI TURBOS!!!!!

NOTE: This Rebuild Kit is for Standard Rotation Only (Evo 1 -3 Evo X Turbos). This Kit is not for Evo4 – 9 Turbos Because They Use a Reverse Rotation Thrust Bearing. We also Sell the Evo 4-9 Rebuild Kit Here!

 

 

Garrett T2 T25 T28 360 Degree Turbo Rebuild Kit

300zx t2 Twin Turbo Rebuild kit


t2 t25 t28 360 degree Turbo Rebuild kit

We Offer Garrett T2 T25 T28 360 Degree Turbo Rebuild Kit for Nissan and DSM TurboChargers. Take Advantage Of This Great Deal From Our Ebay Store Or Amazon Store Below! This Rebuild Kit Is an Upgrade for the Following:

  • 88 – 00 300zx Twin Turbo t2 turbos
  • 95-99 Eclipse GST GSX (DSM) (4G63T) -T25 Turbo
  • 95-99 Eagle Talon TSI  (DSM) (4G63T) -T25 Turbo
  • SR20DET Factory Turbo (nissan Silvia) -T25 Turbo
  • VG30DETT Z32 (1988 – 2000 300zx twin turbo) -T2 turbo
  • This Kit Features a Stronger 360 Degree Thrust Bearing with a Large Oil feed Hole and Upgraded Thrust Collar and Spacer.

Take Advantage of the Great Deal That We Offer for Our Rebuild Kits!

Our Garrett T2 Turbo Rebuild Kit Includes:

  • 1 360 degree thrust bearing with large oil feed hole
  • 1 thrust collar and 1 spacer
  • 2 piston rings seals front and rear
  • 2 o-ring seals
  • 3 retaining bearing retaining clips
  • 3 screw to hold thrust bearing down
  • 2 narrow journal bearings (nissan)
  • 2 wide journal bearings (DSM t25/t28)
  • 2 turbine housing retaining plates
  • c-clip  for front plate
  • 1 new stainless steel heat shield

Garrett T2 Turbo Rebuild Kit