Category Archives: Holset Turbo Upgrade

HX40 Compressor Wheel And Housing

HX40 Compressor Wheel and HousingWe are Proud to Provide New HX40 Compressor Wheel And Housings for Easy HX35/HX40 Hybrid Upgrades!

Here are the Details:

  • Brand new 60mm x 86mm Compressor Housing for 7 Blade HX40
  • Brand New 60mm x 86mm x 89.5mm Extended Tip billet Compressor Wheel

 

 

Compressor Wheel Details:

  • Slimnose Hub
  • Light Weight (20 grams lighter than Stock)
  • Thin Blades
  • Machined From Solid Aluminum
  • Extended Blades
  • 60 x 86 x 89.5mm
  • Balanced and Ready to Install

What Else Do You Need To Know to Install this on your HX35 or HX40:

  • Your Bearing Housing Must be Machined to 87.5mm to Accept the HX40 Compressor Wheel
  • Take Note that the HX40 8 blade is 57mm x 82mm, so The Bearing Housing for that Will Have to Be Machined Also
  • We Do Machine Bearing Housings for $20, but Most People Take Their Bearing Housing To a Local Machine Shop, so they Don’t Have to Wait on Shipping Down Time

Take a Look At the Weight Comparison Picture Between the Two Compressor Wheels:

Holset HX40 Billet Wheel

HX40 Billet Wheel vis Cast Wheel

 

 

 

 

 

 

 

If You Like What we have to Offer, You can Purchase Our Compressor Housing and Billet Wheel Here:

HX40 Compressor Wheel and Housing

Holset HX40 Super Billet Compressor Wheel

HX40 Billet Wheel vs Stock 60 x 86Introduction HX40 Super Billet Compressor Wheels!

Weighing in at 127 Grams, in the Right Corner! Weighing in at 147 Grams in the Left Corner!

Results: So Far We Have Seen 79 lb per min at 40 psi With this Billet Wheel on an HY35, Which We Machined for a HX40 64 x 76mm Turbine and the 60 x 86 HX40 Billet Wheel 4015C. (Keep in Mind the HY35 Turbo Only has a 9 cm­2 Turbine Housing.

HX40 Billet Wheel vis Cast Wheel Holset HX40 Billet Wheel

Hear are the Features of This Compressor Wheel:

  • 60mm x 86mm x 89.5mm  Extended Tip
  • Slim Hub matches the Compressor nut dimension
  • Fits HX40 60 x 86 7 Blade as a Direct Replacement
  • Fits HE351, HE351VE, HX40 Super As a Direct Fit
  • Results Logged 79 lb Per Min at 40 Psi on a 2.0 4g63T
  • Balanced and Ready To Install
  • Machined From Solid Aluminum
  • Light Weight!

Here is a link To Our Ebay Listing If You Would Like to Purchase This Wheel:

HX40 Billet Compressor Wheel