Forced Performance FP Red Turbo Rebuild Kit

FP Red Turbo Rebuild KitWe Offer Turbo Rebuild Kits for FP Red, Green, Black, 73 HTA, 71 HTA, 68 HTA Turbochargers. 

We Offer 2 Separate Rebuild Kits.

  • Evo 1-3 and Evo X
  • Evo 4-9

 

 

If You Need to Purchase a Turbo Rebuild Kit for an FP Turbo for a DSM, Evo 1-3 or Evo X. You Can Purchase Here:

FP Red turbo rebuild kit

 

If You Need to Purchase a Turbo Rebuild Kit for an FP Turbo for Evo 4 – 9. You Can Purchase Here:

Forced Performance Red turbo rebuild kit

 

Why Use Our Rebuild Kits?

Have You Noticed In and Out Shaft Play with Your FP and MAP Turbochargers?  I Have Seen Steel Thrust Bearings in these Turbos In the Past. Steel is not a Good Bearing Material, and the Steel Bearing Requires Zinc Rich Oil. But Even if You Use the Special Oil, You can Still Have Failures. The Steel on Steel Contact Builds Up Excessive Heat in the Cartridge, Causing the Oil to Dry Up, Which Causes the Thrust Bearing to Fail.

FP Says On their Website, that the Warranty is Void if you Push Their FP Black Over 28 PSI. With Our 100% Copper Bar Thrust Bearings, We Have People Pushing 34 PSI Daily Driven with a Turbo Lab 60mm Evo 9 Turbo, Making over 600 HP, Without Problems.  Copper Bar Dissipates Heat and is Standard Material In OEM Turbochargers.

 

Comments

comments

9 thoughts on “Forced Performance FP Red Turbo Rebuild Kit

  1. Alexander

    Im looking for a rebuild kit for an evo 8 stock turbo . This seems similar dont know if it will work for the stock turbo?

    Reply
  2. Connor Edwards

    Hi I am in need of a rebuild kit for a 71HTA for a wrx. Do either of these work with my turbo? Thank you much.

    Reply
  3. Ted

    I am looking for a rebuild kit for a journal FP red EVO X. Can you guide me there with a link? The above link doesn’t seem to work

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *