Tag Archives: 2004 6.0 Powerstroke turbo

2003 6.0 Powerstroke 10 Blade Turbine Wheel and Housing

Leave a reply

This is a 2003 6.0 Powerstroke turbine housing upgrade made to fit a 2004.5 -2007 6.0 Powerstroke engine

The internals of this turbine housing is the same as a 2003 6.0 Powerstroke Gt37vas turbine housing. Included are the following:

10 blade Gt37vas 66.4 x 72mm turbine

15mm wide 2003 vanes (2004.5-2007 have 13.2mm vanes)

2004.5-2007 Powerstroke turbine housing machined for 2003 vanes and turbine wheel

New Unison ring

This is an upgraded turbine housing machined to fit 2004.5 -2007 Gt37vas turbochargers as an upgrade. The turbine upgrade will whistle like a 2003 turbocharger because the internals are identical to the 2003 turbine housing, but the casting (outer shell) is a the same as a 2004.5 -2007 turbine housing. Buying this housing is a great way to restore the tolerances on your factory turbo charger to increase performance and help the factory turbo perform like new again.

Please keep in mind that the 2003 – 2004 6.0 Powerstroke turbo chargers also had 59 mm compressor wheel and matching housings, the 2005-2007 6.0 Powerstroke have 56 mm compressor wheel and compressor housing and originally have a 64 mm turbine wheel / wheel (exhaust wheel). We have 63.5 x 88 billet compressor wheel and housing upgrade kits available here.


Click to buy on Ebay: Gt37vas turbine housing, unison ring, vanes, and turbine shaft

6.0 turbo rebuild kit:

6.0 Compressor wheel and housing upgrade

How to rebuild 6.0 turbo

Buy complete 6.0 turbo upgrade for 2004-2007

6.0 Powerstroke Turbo Replacement

2 Replies

Here is a new 6.0 Powerstroke Turbo Replacement

Turbo – NEW Stock Replacement – 6.0L Powerstroke 2005.5-2007 – Garrett GT3782VA

  • Brand New 6.0 Powerstroke Turbo Replacement $900
  • Not Remanufacured
  • Fixes Burning Oil Problem (blue white smoke out the exhaust)
  • Fixes Turbo Spool Problem (VGT vanes and unison ring stick open and caused by rust in turbine housing) (VGT vanes stuck high rpm mode)
  • Fixes No High Engine RPM Power (Vanes Stuck in Closed Position)
  • Get It Quickly Down Time To Waste on Turbo Rebuild, Buy New!

Click Below to Buy 2003 6.0 Powerstroke Turbo Replacement:

 

 

Click Below to Buy 2004- 2005.5 Powerstroke 6.0 Turbo:

 


 

Click Below to Buy 2005.5  – 2007 Powerstroke 6.0 Turbo:

 

 

Click Below To Buy Powermax Turbo Upgrade:

 

 

Notes: Turbo Differences:

  • 2003 6.0 Powerstroke Specs: 59 X 82 Compressor 66.6 X 72.10 10 Blade Turbine (Has Taller turbine wheel tip height, makes machining required to install turbine in other model turbine housing, vanes are taller and not compatible with other year turbine housings) (2004.5+ has an additional mount on the turbine housing to mount to the pedestal, the 2003 Turbo Doesn’t have This Mount Cast Into The Turbine Housing)
  • 2004 – 2005.5 59×82 Compressor 66.6 X 72 Turbine 13 Blade
  • 2005.5 – 2007 56 x82 Compressor 64.5 X 72 Turbine 13 Blade
  • 2004.5-2007 Powermax Turbo Upgrade 63.5 X 88 GT4088 Compressor Wheel and 2003 66.6 X 72.10 10 Blade Turbine Wheel 175 hp gain without loss of spool.

6.0 Powerstoke Turbo Rebuild 2003 – 2007

If You would rather spend time rebuilding you turbo and less money you can watch my 6.0 Powerstroke turbo rebuild tutorial video and buy our rebuild kit.

We Also Sell Powerstroke Turbo Upgrade Parts that do Require Machining, We Do Upgrade Powerstroke Turbos But it is a Time Consuming Process Which I Dont Recommend Unless you can Afford 3-4 Weeks Down time.

 

 

Here Is A Link To Our Upgraded Complete Turbo , Get your Today !!!!

63.5 X 88 X 94mm Billet wheel !!!!

Supports up to 175hp over stock !!!!