Category Archives: Billet Compressor Wheels

Precision 6262 6266 Billet Compressor Wheel

Here is our 6262 and 6266 billet compressor wheel replacement which fit gen 1 and Gen 2 6262 and 6266 turbo chargers. This billet compressor wheel fits both ball bearing and journal bearing 6262 and 6266 turbo chargers. This billet compressor wheel is balanced and ready to install as a direct fit. No machine work or additional balancing is needed. Click the buy button below to buy 6262 billet compressor wheel from our ebay listing.

Click to buy 6262 billet compressor wheel from our Ebay listing
  • Balanced and ready to install
  • fits Precision 6262 and 6266
  • fits ball bearing and journal bearing precision 6262 and 6266 turbo chargers

Precision 6466 Billet Compressor Wheel

This is a direct fit replacement for precision 6466 Gen 2 ball bearing turbo charger. This compressor wheel can be used to upgrade a 6262 if the 6262 compressor housing is machined to fit the 6466 compressor wheel. This compressor wheel is balanced and ready to install without the need for additional balancing. The 6466 only exists in the Gen 2 ball bearing version from precision, so if you have a 6466 this is a direct fit for the original precision 6466 turbo charger.

Click to buy 6466 billet compressor wheel from our Ebay listing

7 Blade TD05 20g Billet Compressor Wheel

6,7, and 11 blade billet 20g compressor wheels

Here is Our TD05 TD06 20g Billet Compressor Wheel. This wheel is available in 6,7, and 11 Blade. The 7 Blade is Most Popular, the 11 Blade is The Fastest Spooling but the Lesser Blades are Capable of More Hp but is Most Efficent at Higher Boost Levels.

  • In Some Cases Machining your Compressor Housing or Bearing Housing is Required Which is a Service That We offer also
  • Direct Fit for 20g Compressor Housing 
  • 52.6 x 68 x 71 (extended tip)
  • Horsepower Rating: 415 – 450 Hp (To Reach 450 HP you need a Turbine Upgrade Tdo6sl2 or bigger)
  • 14b, S16g Require Machining Bearing Housing and Compressor Housing
  • B16g, Evo3 16g, Evo X 152G6-12TRequire Compressor Housing Machining Only 
  • Direct Fit For Hahn Racecraft, Tomioka Racing, Blouch 20G
  • Upgrade For Evo1-3 EVO X, Conquest TSI, Starion, DSM 89-94 and More 
  • Balanced and Ready To Install 
  • We Can Balance your Assembly for $40, We need Your Thrust Collar, Thrust Spacer and Compressor Nut To Balance Your Assembly Or You can Buy Our Rebuild Kit 
  • Our Upgraded 16g Rebuild Kit is Required For Durability if you plan to Boost over 20 PSI (Upgraded Thrust Bearing Thrust Collar and Thrust Spacer
  • Does Not Fit Evo 4-9 or SRT4 (Reverse Rotation) (See Other Listing For Reverse Billet Compressor Wheel)

MHI 20g Compressor Housing

Click here to buy our 20g billet 7 blade compressor wheel from our Amazon Store.

Billet Compressor Wheel vs Cast

Is the Billet Compressor Wheel vs the Cast Compressor Wheel Worth It.  The Billet Compressor Wheel is Usually Over 100 Dollars More than the Cast Compressor wheel, Which Leads You to the Question, is the Billet Compressor Wheel Worth It or is Your Money Best Spent Somewhere Else? I Made This Video To Help You Make an Educated Decision.

Some Billet Compressor Wheels Weigh Less than the Cast compressor Wheels and Some Billet Wheels Weigh More than the Cast Compressor Wheels. I Would not Make a Decision Based on the Weight Alone. I Would Chose Based on Usable Surface Area that the Blades Can Use the Capture More Air.  In this Video I also Demonstrate an Example of a Billet Compressor Wheel that I Didnt Think Was Worth It. The Main Advantage Of Billet Compressor Wheels vs Cast is:

  1. Lighter Weight (some cases it is heavier)
  2. More Room for Air Flow
  3. More Durability (Cast Wheels can Have Air Pockets Creating Weak Spots, But Billet Wheels are machined for Solid aluminum)

If You Would Like the Take a Look at Our Billet Wheels Available, You can Find Them On Our Ebay Store Here.

ebay store

Garrett GTX3076R Compressor Wheel + Housing

Garrett GTX3076R Compressor Wheel + Housing

GTX3076r compressor housing and wheel

Here is a Great Upgrade for GT3071R (must machine Bearing housing) or GT3076R (no machining Require)

  • GTX3076R Compressor Housing + Billet GTX3076R Compressor Wheel
  • 58mm x 76mm x 80.49mm
  • 600+HP Capable (Depends on Turbine Housing Size) .63 .82 1.06 a/r
  • Easy Upgrade for GT3071r to GT3076r turbochargers
  • Upgrade To GT3071r is 53.11 x 71 and gt3076r is 57 x 76
  • Balancing Cartridge Recommended

Garrett GT37R Turbo Rebuild Upgrade

Garrett GT37R Turbo Rebuild Upgrade 

  • GT37R Turbine Wheel Replaced
  • T67 66.6 x 84 x 90 Drop In GT37R Billet Compressor Wheel Installed
  • TO4E Seals Replace From This Kit (this whole kit wont be used, just the seals and compressor plate tabs.)
  • Contact us if you want to Know a cost estimate of fixing your GT37R

6.0 Powerstroke Powermax Billet Compressor Wheel

6.0 Powerstroke Billet Compressor Wheel We Sell 6.0 Powerstroke Powermax Billet Compressor Wheel. 

  • Fits 6.0 Powerstroke GT3782VAS (GT37VAS) (Machining is Required)
  • 63.5mm x 88mm x 94mm
  • We Offer the Best Price Online Guaranteed
  • Compressor Wheel is Balanced and Ready to Install
    • 63.5 x 88 x 94 Billet Extended Tip Compressor Wheel
    • Light Weight Billet Compressor Wheel
    • 10% Increase In Flow Over Stock
    • Balanced and Ready To Install
    • For 6.0 l Diesel Truck GT3782VA Upgrade
    • Machining Compressor Plate, Compressor Housing is Required
    • We not offer the wheel and housing kits, to simply upgrading your turbo the link is below: 

6.0 Powerstroke Powermax Billet Compressor Wheel

GTP38 7.3 Powerstroke Billet Compressor Wheel

Powerstroke turbo Upgrade 7.3We Offer Garrett GTP38 7.3 Powerstroke Billet Compressor Wheel Upgrades For The Ford Powerstroke.

Billet Wheel Details:

  • 67mm x 88mm x 92mm
  • Balanced and Ready To Install
  • 6 + 6 Blade
  • Extended Tips
  • Narrow Hub
  • Threaded
  • Thin Blades
  • Light Weight

Machining is required for this compressor wheel To install. If you do not have a machined compressor housing and would rather buy a machined cover and plate than to machine yours, click here to buy 99-03 7.3 compressor housing and wheel upgrade kit. This is currently the largest billet wheel available, the factory compressor wheel is 60mm x 80mm, this billet upgrade is 67mm x 88mm x 92mm

7.3 turbo upgrade

GTP38 Powerstroke Turbo Upgrade 7.3 67mm x 88mm

Powerstroke turbo Upgrade 7.3We Have GTP38 Powerstroke Turbo Upgrades 7.3 Available. Our Powerstroke Billet Compressor Wheel Details:

  • 66mm x 88mm x 92mm
  • Balanced and Ready To Install
  • 6 + 6 Blade
  • Extended Tips
  • Narrow Hub
  • Threaded
  • Thin Blades
  • Light Weight

Machining is required for this compressor wheel To install. If you do not have a machined compressor housing and would rather buy a machined cover and plate than to machine yours, click here to buy 99-03 7.3 compressor housing and wheel upgrade kitThis is currently the largest billet wheel available, the factory compressor wheel is 60mm x 80mm, this billet upgrade is 67mm x 88mm x 92mm

7.3 turbo upgrade


Most of the 7.3 Powerstroke Turbos Have a 67mm Turbine Shaft. There is a 69.78mm Turbine Shaft Upgrade Available that Isn’t Required, But It is an Option, 94-97 models and 01-03 E450 models only had the 69.78mm turbine factory and had no wastegate. Here are the different turbine wheel and shaft sizes.

Holset HX40 67mm x 89mm Turbo Upgrade

HX40 Turbo UpgradeHere is a Holset HX40 67mm x 89mm Turbo Upgrade That We Offer.

Specs:

  • 67mm x 89mm x 95mm Billet Compressor Wheel
  • 67mm x 76mm 10 Blade Turbine Shaft
  • Good for 900 + Hp
  • Machined Bearing Housing for Compressor Oring
  • Upgrade for HX35 HX40 HE341 HE351

Holset Turbo Upgrade For:

  • HX40 Turbo Upgrade
  • HX35 Turbo Upgrade
  • HE351 Turbo Upgrade
  • HE341 Turbo Upgrade
  • HE351CW Turbo Upgrade

67mm hx40 10 blade

HX40 67mm x 76mm 10 Blade Turbine.

HX40 67mm x 76mm 10 Blade Turbine Shaft Upgrade.

  • Lighter Weight than the 12 Blade HX40 Turbine
  • Seems To Lose Some Spool Time Over the 12 Blade
  • The 12 Blade 67mm + 67mm Compressor Wheel in HE351 Spools Faster than the Factory turbo due to the Larger Exducer of the Turbine Shaft

We Do The Service for This Turbo But We Also Sell The Parts Here:

NOTES:   This Upgrade Also works for H1E H1C, But the Compressor Plate must be Machined for the HX40 Thrust Collar (easy job). For the Holset HE351VE VGT Turbo, This Upgrade is Possible, But The Turbine Upgrade is limited to a 64 x 70mm Turbine. The Exducer of the VGT Shaft Upgrade is Limited to 70mm Because the VGT Arms Hit the Turbine Shaft of the 76mm exducer.

If You Need or Want Machining Services, We Machine Housings for $150 Each, Contact us at

tu*************@gm***.com











for more Information.