Author Archives: Austin

2001 – 2007 5.9 Cummins Turbo Rebuild Kit

3 Replies

Here is Our Rebuild Kit for 2001 – 2002 5.9 Dodge Ram Turbo A/T HY35 and all Factory Turbos on 2003 – 2007 5.9 Cummins Turbo Diesel.

2001 - 2007 5.9 Cummins turbo rebuild kit

This kit includes:

  • Machined from Copper Bar Upgraded Thrust Bearing
  • 2 Journal Bearings
  • 4 C-Clips to Hold in the Bearings
  • 2 Piston Ring Seals (front and rear)
  • Front Seal Plate
  • Oil Deflector
  • Oil Feed Gasket
  • Oil Return Gasket
  • 1 Rubber O-ring for Front Seal Plate
  • 1 Rubber O-ring for Compressor Housing (you may need to machine your bearing housing for this install unless yours is already done)
  • 1 Rear Heat Shield
  • Free Shipping in the USA

This Rebuild Kit Work With The Following:

  • Dodge Cummins 5.9 2003-2004.5 (HE341 (2 variations 54×78 Compressor and 56 x 78)
  • Dodge Cummins 5.9 2004.5-2007 (HE351CW 60 x 86 Compressor)
  • Dodge Cummins Automatic Transmission 2001-2002 (HY35 54 x 78 Compressor)
  • HY35
  • HE351CW
  • HE341
  • All Parts Will Fit HX35 and HX40, But We Have a Separate Listing for the HX35 Kit, This Listing is Specifically for the HE351CW, HE341, and HY35 to Avoid Selling You Parts That You Don’t Need (Exhaust Housing Bolts and Brackets) and to Include the Bearing Housing Oring That You Do Need (Smaller than HX35 Oring)
HY35 HE341 HE351CW Turbo Rebuild Kit

Click buy now button to buy on amazon without vband clamp, click text below to buy from our ebay listing with vband clamp.

Click Here To Order Yours With V-Band Clamp !!!

Watch My YouTube Video: HE341 HE351CW HY35 Compressor Housing Oring
Commons Vehicles With This Turbo:

  • 2001-2007 Dodge Ram Cummins Turbo Deisel
  • Construction Equipement
  • Vehicles with Cummins Engines and More!

Turbo Part Numbers:

  • 4043600 (HE351CW Turbo Part Number)
  • 4089797
  • 4032347 (HE351CW Cartridge Part Number)
  • 4036835
  • 4037001
  • 4089797
  • 4043600
  • 4036836
  • 4037001
  • 4037002
  • 5143256AA
  • R5143256AA
  • 3599891 (HE351CW Actuator Part Number)
  • 4038233 (HE351CW Bearing Housing Part Number)
  • 4042138 (HE351CW Turbine Housing Part Number)

Rebuild Kit Part Number:

  • 4031484

This Rebuild Kit DOES NOT Work With The Following:

  • HE341VE
  • HE351VE
  • HY40V
  • VGT Models
  • H1E
  • H1C
    We Sell Kits for These but this Kit is not for These Models listed

Keywords:

  • HY35 turbo rebuild kit
  • he351cw turbo rebuild kit
  • he341 turbo rebuild kit
  • Dodge Ram Cummins turbo rebuild kit
  • 03 cummins turbo rebuild kit
  • 04 cummins turbo rebuild kit
  • 07 cummins turbo rebuild kit
  • 05 cummins turbo rebuild kit
  • 02 cummins turbo rebuild kit
  • 01 cummins turbo rebuild kit
  • 2001 5.9 cummins turbo rebuild kit
  • 06 5.9 cummins turbo rebuild kit
  • 2002 5.9 cummins turbo rebuild kit
  • 2003 5.9 cummins turbo rebuild kit
  • 2004 5.9 cummins turbo rebuild kit
  • 2005 5.9 cummins turbo rebuild kit
  • 2006 5.9 cummins turbo rebuild kit
  • 2007 5.9 cummins turbo rebuild kit
  • 5.9 common rail turbo rebuild kit
  • common rail turbo rebuild kit,
  • dodge cummins turbo rebuild kit
  • dodge cummins 5.9 turbo rebuild kit
  • 5.9 dodge cummins turbo rebuild kit

2003-2007 Dodge Ram Cummins 5.9 Turbo Upgrade

6 Replies

2003-2007 Dodge Ram Cummins 5.9 Turbo Upgrade

Here is Turbo Lab’s HE351, HE351CW, HE341, HY35 Turbo Upgrade for the 2003 – 2007 5.9 Dodge Cummins Turbo Diesel Common Rail. We Have a Few Options Avaliable for the Upgrade Listed Below. The 67mm Compressor and 67mm Turbine Wheel Has Dynoed at the 700 HP mark.

Factory 2003 – 2007 Dodge 5.9 Cummins Turbo Specs

  • HE351 / HE351CW 60 x 86mm Compressor Wheel 58 x 65mm Turbine Wheel
  • HE341 Specs 54 x 78mm or 56 x 78mm Compressor Wheel and 58 x 65mm Turbine

Visit our EBay listings for Our Billet Compressor wheel options below:

Turbine Wheel (Exhaust Wheel) Options Are:

What to Expect From our Turbo Upgrade:

  • Reduce Drive Pressure
  • Lower EGTs as Much as 400 Degrees (1060 F)
  • Increase Fuel Economy
  • Increase Up to 700 Hp to Your Truck!

For Some Of Our Customers That Dont Care so Much for the Added Horsepower, We do Recommend Installing Our 67 x 76 Turbine Housing and Turbine Wheel On the HE351 or HE351CW To Lower Your EGTs and add More Hp. Upgrading the Turbine Housing and Turbine Wheel Alone Will Add more HP Because the Factory Turbine Housing is Very Small and Restrictive and Causes a lot of Problems with High EGTs in Towing Condition. You Can Purchase our HE351 HE351CW HE341 Turbine Housing and Turbine Wheel Here Which is a Direct Fit and Does not Require Balancing to Install.

If Your are Interested In having us build your HE351 Turbo You can Contact Us Here. If You want to Build Your Own Turbo Here, visit our EBay listing product links below to purchase.

Keywords:

  • Common Rail Turbo Upgrade
  • Turbo Upgrade Cummins 5.9
  • HE351 Turbo Upgrade
  • HE351CW Turbo Upgrade
  • HE341 Turbo Upgrade
  • 2007 Cummins 5.9 Turbo Upgrade
  • 2006 5.9 Cummins Turbo Upgrade
  • 2005 5.9 Cummins Turbo Upgrade
  • 2004 5.9 Cummins Turbo Upgrade
  • 2003 5.9 Cummins Turbo Upgrade
  • 2002 5.9 Cummins Turbo Upgrade
  • Dodge Ram 2500 Turbo Upgrade
  • Dodge 2500 Turbo Upgrade


Holset HX35 Turbine Housing Machining

4 Replies

Holset HX35 Turbine Housing Machining

At Turbo Lab we can Machine your HX35, H1C, or HX40 Turbine Housing to a larger Turbine Wheel. The Factory HX35 Turbine Wheel is 60mm x 70mm, and the Turbine Housing can be Machined to the HX40 64mm x 76mm and the HX40 67 mm x 76mm Turbine Wheel. Machining Your Turbine Housing for the Larger Turbine Wheel, will Help Lower EGTs, and Drive Pressure Significantly.

You Should Upgrade Your Turbine Wheel or Turbine Housing Size If you have Already Machined Your compressor Housing for an Hx40 60 x 86 Compressor Wheel or Larger. You need to use a Turbine Wheel in Sink with the Compressor Wheels Flow or close. The closer and Flow Rates the Compressor and Turbine Wheel are to each other the more Efficient your Turbo will be and the Faster It will Spool. If you use a 67 x 89 x 95 Billet Compressor Wheel then you Should use a 67mm x 76mm Turbine Wheel. If You use a 64mm x 76mm Turbine, You can Compensate by using a Larger Turbine Housing.

If You need us to Machine your HX35, H1C, or HX40 Turbine Housings, We can do that for You and we have all of our Programs on CNC.  You can Contact Us Here.

Holset HX40 Exhaust Housing (Turbine Housing)

8 Replies

Holset HX40 Exhaust Housing (Turbine Housing)

Holset HX40 Turbine Housing

  • T3 .82 a/r Holset HX40 Turbine housing
  • Compact and Light Weight (<10 lbs)
  • 600 HP capable if Machined to HX40 Series
  • Cast Iron
  • Includes Stainless Steel Vband Clamp and Downpipe Flange
  • Fits Holset HX40 and Some H1E (some are 64 x 76 and 67 x 76)
  • Machined for HX40 64mm x 76mm Turbine Wheel
  • Leave a Message if you want me to CNC Machine the Housing For 67 x 76 Turbine
  • Excellent Upgrade for Aftermarket Application
  • Larger Than BEP .70 a/r (Better Casting and Better Machining)
  • Increase Spool
  • T3 Open (Not Twin Scroll)

Holset HX40 Turbine HousingCLICK HERE TO ORDER YOURS !!!!


Keywords:

  • Holset HX40 Exhaust Housing
  • Holset HX40 Turbine Housing
  • Holset HX40 T3 Housing
  • Holset HX40 Housing
  • BEP HX40 Housing
  • HX40 Housing
  • HX40 Turbine Housing For Sale
  • HX40 Turbine Housing Size
  • Holset HX40w Turbine Housing

Holset HX35 Exhaust Housing (Turbine Housing)

3 Replies

Holset HX35 Exhaust Housing

Holset HX35 Exhaust Housing

  • T3 .82 a/r Holset HX35 Turbine housing
  • Compact and Light Weight (<10 lbs)
  • 500 Hp Capable (600 HP capable if Machined to HX40 Series)
  • Cast Iron
  • Includes Stainless Steel Vband Clamp and Downpipe Flange
  • Fits Holset H1C
  • Machined for HX35 H1C 60mm x 70mm Turbine Wheel
  • Excellent Upgrade for Aftermarket Application
  • Lareger Than BEP .70 a/r (Better Casting and Better Machining)

Holset HX35 Turbine Housing

For The Dodge Cummins We Also Machine the HX35 Turbine Housing for The 64mm x 76mm and 67mm x 76mm HX40 Turbine Wheels.

Keywords:

  • Holset HX35 Exhaust Housing
  • Holset HX35 Turbine Housing
  • BEP Holset Housing HX35
  • HX35 Turbo Exhaust Housing
  • HX35 BEP Housing
  • HX35 Housing Upgrade
  • HX35 T3 Housing
  • HX35 Exhaust Housing
  • HX35 Turbine Housing
  • Holset Exhaust Housing

Continue reading →

HE351 Exhaust Housing Upgrade

10 Replies

HE341 HE351 Exhaust Housing Upgrade

img_1010

Details:

  • HE351 HE351CW HE341 Turbine Housing Upgrade
  • 67mm x 76mm HX40 Turbine Wheel + Turbine Housing
  • Reduce EGTs
  • Lower Drive Pressure
  • Increase Spool Up (because of 76mm exducer of turbine)
  • Brand New Turbine Housing
  • Direct Replacement of HE341 HE351 HE351 Turbine Housing
  • Great To Replace Old Cracked Turbine Housing and Prevent New Turbine Housing From Cracking by Using Larger Turbine Wheel to Reduce Exhaust Temperature

The HE351 HE351CW and HE341 All Have Problems with Excessive Hot EGTs in Towing Condition.  Our Turbine Housing and Turbine Wheel is Designed To Reduce Your EGTs as Much as 400 Degrees. One of Our Customers saw a 400 Degree Temperature Drop From 1600 Degrees to 1060 Degrees Fahrenheit in Towing Conditions Through the Mountains of Montana.

This Is the same Turbine Housing and Turbine Wheel, that we use in all of Our Upgrades for the HE351, HE351CW, and HE341. This Turbine Housing and Wheel Upgrade Is an Excellent Bolt on Upgrade for the HE351 and HE351CW Because the HE351 already has a 60 x 86 HX40 Compressor Wheel.

This Turbine Housing and Wheel Upgrade will Reduce Drive Pressure, Lower EGTs, Increase Fuel Economy, and Unleash up to 700 Horsepower (Dyno Proven with our 67x89x95 Billet Compressor Wheel In Combination with This Turbine Housing and Wheel)

Click to BUY HE351 HE351CW HE341 TURBINE HOUSING AND 67mm TURBINE SHAFT on Amazon

 

Click to BUY THE HE351CW TURBINE HOUSING on Amazon



Click to BUY THE HE351CW 67 X 76mm TURBINE SHAFT on Amazon  (machining factory turbine required )

Keywords:

  • He351 Turbine Housing
  • HE351CW Turbine Housing
  • Holset HE351 Exhaust Housing
  • HE351 Turbo Exhaust Housing
  • He351 Housing
  • HE351 Exhaust Housing Upgrade
  • HY35 Turbine Housing (will Fit HY35 Bearing Housing, but Will Not Fit HY35 Original Downpipe)

Holset H1C H1E Turbo Upgrade Options

3 Replies

Holset H1C H1E Turbo Upgrade Options

Find our eBay listings for billet compressor options below:

Visit our eBay listings below for our turbine wheel upgrade options :

Continue reading →

Subaru WRX Turbo Upgrade

1 Reply

Subaru WRX Turbo Upgrade

This is Our Subaru Wrx turbo Upgrade option for the Factory Turbochager, you must Provide a Core Turbo For This Service. We do the TDO4HL Upgrade For $550 (50x62x65 bcw and 45 52 9 Blade TW).

Here are Larger Turbo Upgrade Options That We Build Brand New.

Subaru STI, Legacy GT, WRX Turbo Upgrade Options

We Also Build Larger Turbos 16g, 20g, and Larger For $750 without Wastegate or set up for External Wastegate and $850 with an Internal Wastegate Actuator. (You do not have to provide a core turbo for the 20g turbos or larger, we build new units.)

  • 16g 48.3mm x 68mm compressor wheel / tdo5h 12 or 9 Blade Turbine Wheel 375-400hp
  • 18g 50 x 68mm compressor wheel / tdo5h 12 or 9 Blade Turbine Wheel 400-425hp
  • 20g 52.6mm x 68mm / tdo5h 12 or 9 Blade Turbine Wheel / TDO6SL2/TDO6/TDO6H 400-450hp

TDO6, TDO6sl2, TDO6H Series ($800 without Wastegate Actuator $850 With) 

  • 56 x 76 x 79  7+7 Blade Billet Compressor Wheel /TDO6, TDO6SL2, or TDO6 500hp
  • 58 x76 x 80  11 blade GTX3076r Compressor Wheel / TDO6H Turbine 550hp+
  • 60.27 x 82 x 83  7+7 Blade Billet Compressor Wheel / TDO6H 9 blade 600hp+
  • 60.5 x 78 x 83 5+5, 6+6, or 11 blade 25g Billet Compressor Wheel / TDO6H 9 blade 600hp+

Turbine Wheel Upgrade Options:

  • TDO5H 49mm x 56mm 12 or 9 blade
  • TDO6SL2 54mm x 61mm 11 or 9 blade
  • TDO6 55mm x 65mm 12 blade
  • TDO6H 58.8 x 67.2 11, 9 blade unclipped, 9 blade clipped (I recommend 9 blade clipped or unclipped because it’s 100 grams lighter than the 11 blade)

Contact Us For a Turbo Build:

tu*************@gm***.com











Click Here To Order Yours !!!!

JB4 N55 For Sale

3 Replies

JB4 N55 For Sale from Burger Tuning.

Jb4 n55 for sale

Buy jb4 for n55 2011 – 2013 E series (Harness A)

Jb4 n55 for sale e series

Click to buy on eBay

Buy JB4 for n55 2011 – 2013 E Series (Harness B)

Jb4 n55 for sale e series harness b

Click here to buy on eBay

Buy jb4 for n55 2014 F Series (electronic actuator) 135i 335i 435i 535i, 635i

Jb4 n55 for sale

Click here to buy on eBay

  • Add up to 60hp to the wheels (80hp crank) on a completely stock car
  • Add up to 100hp to the wheels (120hp crank) on a fully modified car
  • The JB4 features a simple plug and play installation harness for easy installation and includes many features not found on any other tune. Including the ability to enable/disable the tuning from the drivers seat, gear dependent boost control to help with traction, ethanol and racing fuel support, built in diagnostic code reading/deleting, free firmware updates, and much more.
  • JB4 does not require any additional modifications or previous stages.
  • Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience.
  • The JB4 also does not require any user setup or customization but for more advanced enthusiasts the BMS DATA cable allows you to connect via a laptop for data logging and free software updates.
  • Note JB4_F30 shipments as of 11/15/2014 include the FlexFuel add on connector. This no longer needs to be purchased separately for these models. Also note the EWG add on connector remains optional and can be purchased separately for higher HP applications where direct EWG control is required. F Series N55 JB4 Applications: BMW 1 Series • 2013+ N55 BMW F20 1M LHD BMW 2 Series • 2014+ N55 BMW F22/F23 M235i BMW 3 Series • 2012+ N55 BMW F30 F31 335i/ix BMW 4 Series • 2014+ F32 F33 F36 435i / 435ix BMW 5 Series • 2011+ N55 BMW F10 F11 535i/ix • 2010+ N55 BMW F07 535i/ix GT BMW 6 Series • 2011+ N55 BMW F12 F13 640i/ix • 2011+ N55 BMW F06 640i/ix Gran Coupe

JB4 N54 For Sale

1 Reply

JB4 N54 For Sale

Add 80hp + to the wheels (100hp crank) on a completely stock car, up to 160hp + to the wheels on factory turbos, or up to 350hp + to the wheels on a fully modified car with larger turbos. The JB4 includes a simple plug and play installation harness and is compatible with all ECU versions and transmission types. It’s everything you need to take your N54 powered vehicle from mild to wild! In addition to several performance maps which can be selected “on the fly” right from the drivers seat.

The JB4 Includes:

  • 100% stock bypass map
  • a valet mode
  • ethanol fuel (E85) support
  • progressive water/methanol injection support
  • racing fuel map
  • an auto tuning map that adjusts the JB4 mapping to your current climate, octane, vehicle condition, and modifications continuously,
  • an rpm by rpm user adjustable map
  • include optional in dash gauges for boost and other engine parameters, a programmable shift light, on the fly adjustable torque limiting to aid with launches at the track, an optional 2STEP rev limiter & no lift shifting for manual transmission cars, an optional speed delimiter, and much more.

Jb4 n54 for sale

Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. As you decide to modify your car further the JB4 is setup to grow with your vehicle. Whether you’re racing a 100% OEM car on pump gas or a 700whp single turbo drag queen, the JB4 has the perfect mix of performance, features, flexibility, and support to ensure your car performs to the best of its potential!