Tag Archives: dodge cummins turbo upgrade

Holset H1C H1E Turbo Compressor Upgrade

7 Replies

For The Holset H1E and H1C, There are a Lot of Upgrades, But It is Important To Understand That The Most Important Upgrade is Our Rebuild Kit Which Prevents Common Thrust Bearing Issues. You Can Find More Information About Our Rebuild Kits Here.

Next You Must Understand That The Compressor Plate for the H1C H1E Turbos Can Be Machined to Use the HX35 HX40 Thrust Collar, Which Allows You to Run the HX35 HX40 Compressor Wheel Upgrades Below:

Here are a List of the Compressor and Turbine Upgrades:

Billet Compressor Wheels

Turbine Shaft Upgrades

NOTE: Machining Is Required for all of the Compressor Wheel Upgrades for the H1C, but for the H1E 60 x 83 Compressor Housing, The 60 x 86 4015c Billet Wheel Is a Direct Drop In After the Compressor Plate is Machined for the HX35 HX40 Thrust Collar, and the Collar Must Be Use in the Build. This Makes for a Super Easy and Cost Effective Upgrade!

These Upgrade Also Work for the HX35 HX40 HE341and HE351!

If You would Like Machining, Rebuild, or Upgrade Services Then Contact Us Here.

If You Are Looking for the Parts Mentioned Above To Build Your Turbo Then Visit Our Ebay Store Here:

ebay store

Holset HX40 67mm x 89mm Turbo Upgrade

11 Replies

HX40 Turbo UpgradeHere is a Holset HX40 67mm x 89mm Turbo Upgrade That We Offer.

Specs:

  • 67mm x 89mm x 95mm Billet Compressor Wheel
  • 67mm x 76mm 10 Blade Turbine Shaft
  • Good for 900 + Hp
  • Machined Bearing Housing for Compressor Oring
  • Upgrade for HX35 HX40 HE341 HE351

Holset Turbo Upgrade For:

  • HX40 Turbo Upgrade
  • HX35 Turbo Upgrade
  • HE351 Turbo Upgrade
  • HE341 Turbo Upgrade
  • HE351CW Turbo Upgrade
67mm hx40 10 blade

HX40 67mm x 76mm 10 Blade Turbine.

HX40 67mm x 76mm 10 Blade Turbine Shaft Upgrade.

  • Lighter Weight than the 12 Blade HX40 Turbine
  • Seems To Lose Some Spool Time Over the 12 Blade
  • The 12 Blade 67mm + 67mm Compressor Wheel in HE351 Spools Faster than the Factory turbo due to the Larger Exducer of the Turbine Shaft

We Do The Service for This Turbo But We Also Sell The Parts Here:

NOTES:   This Upgrade Also works for H1E H1C, But the Compressor Plate must be Machined for the HX40 Thrust Collar (easy job). For the Holset HE351VE VGT Turbo, This Upgrade is Possible, But The Turbine Upgrade is limited to a 64 x 70mm Turbine. The Exducer of the VGT Shaft Upgrade is Limited to 70mm Because the VGT Arms Hit the Turbine Shaft of the 76mm exducer.

If You Need or Want Machining Services, We Machine Housings for $150 Each, Contact us at

tu*************@gm***.com











 for more Information.