Tag Archives: tdo6

Subaru STI WRX Legacy GT Turbo Upgrade EJ20 EJ25 Options

2 Replies

Subaru STI WRX Legacy GT Turbo Upgrade Options

Most Common Upgrade Options Are:

350 to 415 hp

  • 16g 48.3 x 68mm Compressor and 49 x 56mm Turbine
  • 18g 50mm x 68mm Compressor and 49 x 56mm Turbin
  • 20g 52.6mm x 68mm Compressor and 49 x 56mm Turbine

450 hp

  • SL2 20g 52.6mm x 68mm Compressor and 54 x 61mm Turbine
  • SL2 EF3 56 x 76mm Compressor and 54 x 61mm Turbine (9 Blade)
  • TDO6 EF3 56 x 76mm Compressor and 55 x 65mm Turbine (12 Blade)

500 – 625 HP

  • TDO6H GTX3076R 58mm x 76mm and 58.8 x 67.2 Turbine (9 or 11 blade) (550HP)
  • TDO6H EF4 60.27 x 82 x 83mm 7blade and 58.8 x 67.2 Turbine (9 or 11 blade) (580 +HP)
  • TDO6H 25g 60.5 x 78 x 83mm (5, 6, or 11 blade) and 58.8 x 67.2 Turbine (9 or 11 blade)580+HP
  • TDO6H GTX3582R 62.35 x 82 x 86mm 11 blade and 58.8 x 67.2 Turbine (9 or 11 blade)600+HP

To Install this Turbo You May Need TDO5 Coolant Line Install Kit, Because The thread Pitch of the TDO4 and VF turbos for the Coolant is Different than the MHI TDO5 TDO6 Which is M14 x 1.5. You can buy this coolant kit on ebay Here. (turbo oil feed line water pipe install gasket kit for subaru EJ20 EJ25)

NOTE: 2011+ Year STI Requires Rotation kit to install the turbo upgrade with the 3″ inlet compressor Housing. You must use the 3″ compressor housing for the Compressor wheels 56mm and Larger.

If You would like for us to build you a turbo like this you can contact us at

tu*************@gm***.com











 

Billet Compressor Wheel

9 Replies

bullet2 billet wheel

       With more and more billet compressor wheels on the turbo market than ever, people raise the question: Is it worth it? The truth is it depends on the billet wheel. The first reason for billet wheels was for making a light weight compressor wheel out of a solid piece of aluminum for spool time and over all flow. PTE has the lightest billet compressor wheels on the turbo market today, because they actually remove the most metal from the wheel than any other companies, but they are commonly known for thrust bearing problems which i will explain in another article. Our extended tip compressor wheels are capable of generating more air flow because of the higher blades, however the extended tip wheels are heavier than the regular cast wheels by about 10 grams, but they are worth it because of the wheel capturing more air.  These wheels are machined with a 5 axis endmill which precisely cuts the wheel from a solid piece of aluminum.  These wheels range from 120 to 400$. The batmowheel billet wheel has proved to flow well, the wheel was derived from GE jet engines from air planes. This shape of the wheel was created to allow air to easily flow behind each blade in front of it. The tips are also extended to grab extra air, just like GE’s jet engines.

 

 billet wheels


The reason for changing the number compressor blades is to determine at what rpm the turbo will flow the most air. The less number of blades the more air it will flow at higher boost levels compared to a compressor wheel with more blades. A compressor wheel with more blades will flow very well at higher boost levels(~30 psi) but will not flow as well at lower boost levels. The Lower the blade count on the compressor wheel will help the turbo flow more air than the same compressor wheel with more blades. The more blades on a compressor wheel will help the compressor wheel have a peak flow at lower boost levels (20-25 psi). However some companies have started to make compressor wheels taller to allow a compressor wheel with more blades to grab more air and to flow better at higher boost levels as well. You will see taller 11 blade compressor wheels in the GTX series compressor wheels which are created by garret. The higher the blade count also helps with spool time, because it captures more air at lower rpm of the turbo.  The choice of compressor wheel depends on the what your goals are as far as spool time and the boost level that you plan to run. google622582fe1d69e3ee

What you need to know when upgrading your turbo

81 Replies

turbo_cutaway

       It is very important to know the basics of how a turbocharger works as well as what you are trying to achieve before you send your turbo in for upgrading.  The most important concept is to understand is that you want to build a turbo that has a compressor and turbine wheel with very similar flow rates. To achievethis, the compressor and turbine wheels should have measurements that are very close in size. The inducer of the compressor wheel and exducer of the turbine wheel are the measurements you want close in size. turbo measurements2 The inducer is the measurement of the wheel where the air enters, and the exducer is the measurement of where the air exits. Having less blades on the turbine wheel will help increase flow for a turbine shaft that has a limited measurement. A good example is a 20T compressor upgrade that measures 50 mm x 61 mm, but the biggest turbine upgrade available is the tdo4HL turbine which measures 45.6 mm x 52 mm. The tdo4HL turbine is offered in 12 blade from factory, however we can offer it in 11 blade, and I have also seen it offered in 9 blade too. The 50 mm 20T would have surge issues with the small turbine in 12 blade form, but when the 11 or 9 blade are used, the flow rate of the turbine is more closely match to the 50 mm compressor wheel which being a 45.6mm wheel. Turbine clipping offers the same effect as going with less blades, but instead of going with less blades, the blades are trimmed back to all for more air flow to pass by the turbine wheel. It is always better to go with a turbine that is closer in size to the compressor wheel if it is possible, but it is not always possible. When trying to match a turbine wheel to a compressor wheel that you have already chosen and the inducer measurements of the compressor wheel are inbetween the sizes of two different turbine upgrade sizes and you cant decide which one to go with, always go with the bigger turbine shaft. Turbos work better with an oversized turbine shaft than an oversized compressor wheel. A turbo with a bigger turbine exducer measurement will help prevent surge and support the flow of the smaller compressor rather than using a smaller turbine that will choke it. A good example is if your using a 56mm compressor wheel and the turbine choices are a tdo6h 58mm x 67mm and tdo6 55mm x 61mm, then go with the tdo6h turbine, or you could go with a tdo6 turbine that is clipped or has 11 blades instead of 12.