Tag Archives: holset hx40 billet compressor wheel

Holset HX40 67mm x 89mm Turbo Upgrade

11 Replies

HX40 Turbo UpgradeHere is a Holset HX40 67mm x 89mm Turbo Upgrade That We Offer.

Specs:

  • 67mm x 89mm x 95mm Billet Compressor Wheel
  • 67mm x 76mm 10 Blade Turbine Shaft
  • Good for 900 + Hp
  • Machined Bearing Housing for Compressor Oring
  • Upgrade for HX35 HX40 HE341 HE351

Holset Turbo Upgrade For:

  • HX40 Turbo Upgrade
  • HX35 Turbo Upgrade
  • HE351 Turbo Upgrade
  • HE341 Turbo Upgrade
  • HE351CW Turbo Upgrade
67mm hx40 10 blade

HX40 67mm x 76mm 10 Blade Turbine.

HX40 67mm x 76mm 10 Blade Turbine Shaft Upgrade.

  • Lighter Weight than the 12 Blade HX40 Turbine
  • Seems To Lose Some Spool Time Over the 12 Blade
  • The 12 Blade 67mm + 67mm Compressor Wheel in HE351 Spools Faster than the Factory turbo due to the Larger Exducer of the Turbine Shaft

We Do The Service for This Turbo But We Also Sell The Parts Here:

NOTES:   This Upgrade Also works for H1E H1C, But the Compressor Plate must be Machined for the HX40 Thrust Collar (easy job). For the Holset HE351VE VGT Turbo, This Upgrade is Possible, But The Turbine Upgrade is limited to a 64 x 70mm Turbine. The Exducer of the VGT Shaft Upgrade is Limited to 70mm Because the VGT Arms Hit the Turbine Shaft of the 76mm exducer.

If You Need or Want Machining Services, We Machine Housings for $150 Each, Contact us at

tu*************@gm***.com











 for more Information. 

 

Holset HX40 Super Billet Compressor Wheel

6 Replies

HX40 Billet Wheel vs Stock 60 x 86Introduction HX40 Super Billet Compressor Wheels!

Weighing in at 127 Grams, in the Right Corner! Weighing in at 147 Grams in the Left Corner!

Results: So Far We Have Seen 79 lb per min at 40 psi With this Billet Wheel on an HY35, Which We Machined for a HX40 64 x 76mm Turbine and the 60 x 86 HX40 Billet Wheel 4015C. (Keep in Mind the HY35 Turbo Only has a 9 cm­2 Turbine Housing.

HX40 Billet Wheel vis Cast Wheel Holset HX40 Billet Wheel

Hear are the Features of This Compressor Wheel:

  • 60mm x 86mm x 89.5mm  Extended Tip
  • Slim Hub matches the Compressor nut dimension
  • Fits HX40 60 x 86 7 Blade as a Direct Replacement
  • Fits HE351, HE351VE, HX40 Super As a Direct Fit
  • Results Logged 79 lb Per Min at 40 Psi on a 2.0 4g63T
  • Balanced and Ready To Install
  • Machined From Solid Aluminum
  • Light Weight!

Here is a link If You Would Like to Purchase This Wheel:

HX40 Billet Compressor Wheel