67mm HE351Ve / HE351VE turbo upgrade T51R Mod
Direct fit for the 2007.5 to 2018 6.7 Dodge Ram 2500 and 3500 Dodge trucks
Specs:
• 67mm by 89mm by 95mm billet 7 blade compressor wheel
• 67mm by 70mm 10 blade turbine upgrade
• Rebuild with brand new internals, thrust bearing, Journal bearing, piston ring seals etc
• Capable of 800hp
• The 67mm turbine Shaft upgrade eliminates the 6.7’s common issue of blowing headgasket because excess back pressure.
• Spools the same as a stock turbo
• Keeps the exhaust brake and is direct bolt up
***When installing the electronic actuator make sure the actuator arm is facing all the way toward the exhaust housing. 2010 to 2012 Dodge trucks have filters in the nozzle that will fall apart and make the actuator stick in one position or the other. We replace all the vgt nozzles without the filters to eliniminate that problem.
Can you make t51r modded turbo wish a t4 flange
We can make a t51r t4 version for an HX40 turbo, there are different versions such as t4 open and divided. Divided t4 housings are available in 1.15 and .84 ar and t4 open are available in .81 and .96 ar.
got your rebuild kit he341ve but i also got the piece that goes in exhaust side thats in housing for eng break cleaned it all up but how do u remove that ring in exhaust housing
he351ve
Could the T51R mod be done to an HE351CW. Also curious what size the compressor has to be to have this done, and if it could be done to a smaller, near stock sized HE351 compressor housing.
Could I buy a t51 compressor housing from you for a 6.7 Cummins 2010 stock turbo. Thanks
Could I buy a t51 compressor housing for a 2010 Cummins 6.7. Thanks
Hello, I came across an old video talking about a 6.7 he351 vgt turbo build. I am interested in one of the t51 modded /larger wheel versions, do you have any available.? Is there a core charge and what do you charge?
Thanks Brandon