MHI 14B 16g 20g Turbo Rebuild Kit

FP MAP Tomica Racing turbo rebuild kitMHI 14B 16g 20g Turbo Rebuild Kit Fits:

  • Evo X Turbos
  • MHI Genuine 14b,16g, 18g, 20g, FP Green, Red, Black MAP, Tomica Racing, Blouch, Turbos
  • NOT for Evo 4-9 Turbos, (Visit Here for Evo 4-9 Turbo Rebuild kit)
  • Subaru MHI 16g and Upgraded Turbos
  • Hahn Racecraft Turbos
  • Tomei Turbo

This is an Upgraded Rebuild Kit that is Needed for Running Higher Boost Levels. We Have Customers running 34 PSI on This Rebuild Kit  with the Largest Frame Turbo and Making Over 600 HP and Holding Strong!! Here Is Our Amazon Listing If You Need to Purchase:

Here are the Details of what Our Rebuild Kit Includes:

  • 1 upgraded thrust bearing
  • 1 18mm thrust collar
  • 1 18mm thrust spacer (factory is 14mm)
  • 2 journal bearings
  • 1 front seal
  • 1 rear seal
  • oring for compressor housing
  • oring for inside the turbo
  • 2 bearing retaining clips
  • 1 stainless steel rear heat shield
  • 1 c-clip to hold in the front plate.
  • 1 oil return gasket
  • 1 bolt and nut for the vband clamp
  • 1 compressor nut
  • 1 oil deflector

NOTE: **************THIS KIT DOES NOT WORK WITH KNOCKOFF TURBOS SUCH AS CX RACING OR GODSPEED!!!!!************ ONLY THE TRUE MHI TURBOS!!!!!

NOTE: This Rebuild Kit is for Standard Rotation Only (Evo 1 -3 Evo X Turbos). This Kit is not for Evo4 – 9 Turbos Because They Use a Reverse Rotation Thrust Bearing. We also Sell the Evo 4-9 Rebuild Kit Here!

 

 

Comments

comments

15 thoughts on “MHI 14B 16g 20g Turbo Rebuild Kit

    1. Austin Post author

      Yes, That Turbo uses a MHI CHRA, I know it has a tdo6sl2 turbine wheel, it likely has an 18g(50mm x 68mm) or 20g(52.6mm x 68mm) compressor wheel

      Reply
  1. Cory Kuhn

    Am I able to buy just the turbine seal? I purchased a whole rebuild kit and accidentally bent that seal upon installation.

    Reply
  2. Viktor

    Will this rebuild kit work with fp red turbo for subaru? And in this kit is everything I need to fully rebuild the turbo or will need some additional parts ?

    Reply
  3. Justin BOOST JUNKIE

    Im sure this is the rebuild kit that you guys used on my 14b. Turbo has seen just about 27 lbs of boost for well over a year and around 80 track passes on an extreme level. So extreme it holds the turbo record in the mid 10s. Definitely recommend having the turbo balanced for racing!!!

    Reply
  4. Raul

    I need a rebuild kit for a Td05h 16g small (49178-05200) I want to be able to safely run 17psi on it or more can you point me on the right direction trying to purchase today.

    Reply
  5. Dylan

    Hi,

    Just wondering if I purchase this kit will I have to get the parts balanced before? Can it be balanced when it’s assembled?

    Reply
  6. Dylan Richardson

    Hi Austin,

    I’m looking to do an overhaul on my MHI 20g turbo however I’m wondering if I purchase all the parts from you will I have to get it balanced before or after? Thanks for your help!

    Reply

Leave a Reply to Justin BOOST JUNKIE Cancel reply

Your email address will not be published. Required fields are marked *