FP MAP EVO 8 EVO 9 EVO IX Turbo Rebuild Kit

EVO 8 EVO 9 Turbo Rebuild kitWe Sell Upgraded EVO 8 EVO 9 EVO IX Turbo Rebuild Kits With Upgraded Thrust Bearings and Thrust Collars!

FP and MAP Commonly Have the Steel Thrust Bearings, Which Cause Premature Thrust Bearing Failures if Pushed at Higher Boost Levels! Our Copper Bar Thrust Bearings Solve that Problem!

  • Our Kits are the Strongest Available on the Market!
  • We Have People Boosting 34 PSI Daily With Our Rebuild Kits!

If You are Experiencing Unusual Thrust Bearing Failures with Your Map for FP TurboCharger, Our Rebuild Kit is the Solution To Your Problems. 

Details kit includes:

  • ·       Dual Oil Port Machined from Copper Bar Dual Oil Port Thrust Bearing
  • ·       2 brass Journal Bearings
  • ·       Front and Rear Piston Rings
  • ·       2 Bearing C-clips
  • ·       Thicker Thrust Collar and Spacer
  • ·       Oil Return Gasket
  • ·       1 Seal Plate
  • ·       1 Oil Deflector
  • ·       1 Compressor Nut
  • ·       Includes Evo 8 and 9 compressor O-ring
  • ·       1 Seal Plate Oring
  • ·       1 Heat Shield

NOTE: For Reverse Turbos ONLY, Thrust Bearings Are Directional. MAP and FP Bearing Housings Come Machined to Accept the Larger Thrust Spacer. If you are Installing this on and Original Bearing Housing, then you will Need to Take a Die Grinder to the Bearing Housing. (Its Easy to do If you Have the Correct Tools.)

Evo 8 Evo 9 Evo IX Turbo Rebuild kit

Click to buy from our Amazon listing

The Rebuild Kit Works for the Following Turbochargers:

 Factory Evo 4 – Evo9 (Reverse Rotation turbochargers

FP Evo8 and 9 Journal bearing turbos such as:

o   71HTA

o   FP Green 73 HTA

o   FP Red

o   FP Black

 MAP Evo 8 and Evo 9 Journal bearing turbos such as:

o   MAP EF2

o   MAP EF2.5

o   MAP EF3

o   MAP EF4

 Tomica Racing Evo8 and Evo9

o   16g, 18g, 20g

 Turbo Lab Evo 9 Turbo chargers

o   16g

o   18g

o   3071

o   3076

o   25g

Blouch BBK and BBK Full Evo 8 Evo 9 Journal Bearing Turbochargers

Kingawa EVO 9 25g 

Comments

comments

6 thoughts on “FP MAP EVO 8 EVO 9 EVO IX Turbo Rebuild Kit

  1. Pingback: EVO 9 FP Red Black TDO6H Reverse Turbine Wheel | Turbo Lab

  2. Chris

    How does this kit increase the performance of a stock Evo 9 turbo? Is this just ment to be a replacement to rebuild a tired turbo?

    Reply
    1. Austin Post author

      Its dont increase the performance, it increases the durability. This kits is needed for 20g and larger turbos.

      Reply
  3. Ian Clayton

    I have a MAP turbo #000153 on a 06 evo 8 that was on the car when I got it.
    I can’t seam to find any data info or specs on this thing I even called MAP and was told to email customer service and I’ve yet to get a reply
    My question is will the rebuild kit work on my unit
    And is there an upgrade core/compressor option possible?? Cost being a major factor

    Reply
  4. Hans Hopple

    Hello I bought the evo9 turbo rebuild kit and was unable to locate the YouTube video for the instructions, could you send the link please.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *